Quality analysis of ceramic sealing blocks produced in Porto Nacional (TO)

Authors

DOI:

https://doi.org/10.6008/CBPC2318-3055.2019.001.0003

Keywords:

Quality, Ceramic blocks, National port

Abstract

The quality of the finished work is directly associated with the quality of the materials employed in it. The present study aimed to analyze the red ceramic blocks produced in the region of Porto Nacional (TO). The parameters adopted were in accordance with the Brazilian Association of Technical Standards (ABNT), as set forth in NBR 15270: 2005. According to the data obtained, it is possible to observe that most of the interviewed suppliers stated that they did not know ABNT NBR 15270: 2005 (only 1 of the 4 analyzed says they know it, which is 25%). This is a worrying fact, because the lack of knowledge suggests that the blocks produced will hardly have satisfactory qualities. To manufacture the items, the raw material was extracted from all the companies examined in Monte do Carmo (TO). The verification of the blocks was performed in the laboratory. It was observed that the results of geometric, physical and mechanical tests show that the suppliers do not have products according to ABNT NBR 15270: 2005. In the compressive strength test, none of the analyzed blocks presented resistance greater than or equal to 1,5MPa. In addition, several cracks and deformability were detected in the blocks of all ceramics that impair the use and performance of parts. More effort is needed for companies to tailor their respective modes of manufacturing.

Downloads

Download data is not yet available.

Author Biographies

Jacqueline Pereira Cursino Alves, Faculdade Presidente Antônio Carlos

Acadêmica do segundo período do curso de Engenharia Civil no Instituto Tocantinense Presidente Antônio Carlos (ITPAC-PORTO). Cursou até o sétimo período em Ciências Biológicas (Bacharelado) na Universidade Federal do Tocantins, Campus de Porto Nacional - TO. Onde até o momento desenvolveu pesquisa na área de Química dos Produtos Naturais com ênfase em identificação de classes de metabólitos secundários de plantas endêmicas do Cerrado tocantinense com atividade leishmanicida, três trabalhos de monitoria das disciplinas de Química Geral, Química Orgânica e Bioquímica e atualmente desenvolve pesquisa na área Enzimática.

Fernanda Santos de Carvalho, Faculdade Presidente Antônio Carlos

Graduanda em Engenharia Civil.

Jordan Pinto Guimarães, Faculdade Presidente Antônio Carlos

Graduando em Engenharia Civil. Atualmente é Secretário Financeiro e Acadêmico do Centro Universitário Tocantinense Presidente Antônio Carlos.

Thallya Nóbrega Oliveira, Faculdade Presidente Antônio Carlos

Graduanda em Engenharia Civil. Tem experiência na área de Engenharia Civil.

Diogo Pedreira Lima, Faculdade Presidente Antônio Carlos

Possui graduação em Engenharia Ambiental pela Fundação Universidade Federal do Tocantins (2004). Especialização em Geoprocessamento e georreferenciamento aplicado em planejamento urbano e rural, Engenharia de Segurança do Trabalho, e Mestrado em Engenharia Ambiental voltado para recursos hídricos e saneamento. Tem mais de 10 anos de experiência na área de Recursos Hídricos e Saneamento, atuando principalmente nos seguintes segmentos: Saneamento, Mineração e Indústrias. É professor do curso de Engenharia Civil e Arquitetura na FAPAC/ITPAC Porto Nacional - TO.

Published

2019-06-20